6 Smart Tips on How to Design Your Dream Walls
The colors of the walls you have at home can have a big impact on your life. Some people believe that the colors and combinations you choose can affect your health, while others think that it’s a reflection of your personality. However, making them pretty and fresh can significantly boost your mood.
In this article, 5-Minute Crafts has prepared simple wall designs that will save you lots of time and money and can be done without extra skills.
1.
How to do it:
Step 1: Put a piece of tape on the wall to measure the line you want to paint.
Step 2: Paint the background color of the wall again near the edge on the tape, and let it dry.
Step 3: Once the background color is dry, put the shade of your choice over it.
Step 4: Pull off the tape.
2.
How to do it:
Step 1: Take one empty can of chips and create a circle on it using hot glue.
Step 2: Make several of them, each one should be bigger than the one before. Make sure they are one inside another.
Step 3: Paint the wall brown and make sure you leave extra paint on it. Roll the can from one wall end to another.
Step 4: Repeat until you have covered the whole wall.
3.
How to do it:
Step 1: Take one dough roller and start adding elastic bands to it.
Step 2: Add as much as you can to the roller, but make sure you leave space between them.
Step 3: Dip the roller in paint and move it around so it’s all covered in paint.
Step 4: Roll the roller on the wall to create lines. Repeat this step until the whole side is covered.
4.
How to do it:
Step 1: Start cutting oval irregular shapes, like giraffe prints, from duct tape. Make several shapes.
Step 2: Put them all on the paint roller.
Step 3: Using a hair trimmer, cut the excess sponge from the paint roller, leaving the sponge under the tape untouched. Remove the tapes once you are done.
Step 4: Put the paint in a paint tray and dip the roller.
Step 5: Cover the wall with the paint roller.
5.
How to do it:
Step 1: Cut 1×1 inch squares from paper foam, fold them in half, and put one end under the other.
Step 2: Attach the foam to the roller using a stapler. Repeat the steps and add a few more squares.
Step 3: Put some paint in a paint tray and dip the roller into the paint.
Step 4: Roll the roller over the wall until you have it all covered.
6.
How to do it:
Step 1: Put some paint in a large container.
Step 2: Use a sponge that has wide openings and dip it in the paint.
Step 3: Apply the color to the wall by tapping the sponge.
Step 4: Repeat these steps until you have covered the wall.
Have you ever painted an unusual pattern on the wall by yourself?